Stratford & District Model Railway Club
Modelling Information => DCC Tips/Guides => Topic started by: Martin on December 30, 2024, 16:03:37 PM
-
NOTE: Track Current will replace the 'clock' top right of your controller display.
With your PowerCab on, press [Prog Esc] six times
It should now display SET CAB PRAMS press [ENTER]
Display will show: TRACK CURRENT enter 1 for ON (0 for OFF) press [ENTER]
Display will now show: RECALLS the default number is 2, you can change the number you want, up to 6
Press [Prog Esc] to exit